CatsParfait CSM Heel Weight - 500g
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CSM heel weight, filled with lead ballast to make a 500g weight
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
A CSM Heel Weight for approx. 500g or lead ball bearings. I also wanted something a bit more aesthetic for myself than the solutions I looked at.
Print with 4 walls, 15% rectilinear infill, 5 top/bottom layers in PETG or PLA+ - examples printed in Sunlu Cyan PLA+ (PETG probably better). Use tree supports for handle!
Pause print at layer 232 and 277 to fill with lead ballast/shot. After filling, use a bit of tissue to prevent the tiny balls from flying everywhere people you start the print again!! Like seriously, I'm still finding tiny wee lead balls on my desk! Don't do what I did haha
Print a SINGLE weight at a time, too much weight at once makes your machine unhappy
(I tried whoops)
I got my loose lead from diving weights in the UK as it has restrictions under other names. Using a different material will yield a different weight so just be aware of that if you decide to use steel or something else.
I use 3 of these in combination with heel forks I made for heels and toes.