Battery post insulator for relocation kit.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ensures you aren't able to short the two posts together on the battery relocation kit. My battery is inaccessible
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
My battery for my mini excavator isd under the floorboard of the machine. I used the kit from Amazon (shown in pic) to move the terminals to allow me to charge, jump, etc. BUT, the relocation kit is such that you can short charger clamps together so I added an insulating barrier between the posts.
I noticed that the only indication of polarity was the plastic cap over the connection post. So I split the model in two using a dovetail to connect them. print one red, the other black and slide them together. only 0.1 mm of clearance so it's a stiff assembly.
I made it strong, overkill really, with 35% infill and 6 top layers/walls.
Filament is PLA
Printed on an Ender 3 S1 PRO