10" rack blank cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I tried to design a blank cover for my 10" rack, which also has some kind of purpose.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this blank cover, because wanted something new, a bit more robust panel. I had a 0.91" oled display, so I thought, why not put it there. The mount for the board, that powers and behind the display is still in progress. I also made it without the place for the display. It can be printed in parts, or as a whole panel. I uploaded without the logo, because if you have a textured plate, with the logo you can't have a nice finish on the front, so I think it's better to print a logo seperately, then glue it there.
I used SUNLU PETG, with 0.2 layer height and 0.4 nozzle.