Lenovo Tab M7 DDU Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn a Lenovo Tab M7 into a DDU mounted to your Sim-labs P1X Pro Front Mount wheel deck
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
I had an old Lenovo Tab M7 laying around from a previous task, and I wanted to repurpose it as a DDU for my SimRig. I tried a few ways to mount this, and I'm included the three best ones I've found. One is a full height mount, a few mm above the top of the wheelbase (tall and slim). I realised that I could crop the top half off and have the same result, but a slightly more conveniently removable tablet. Or I could go super shallow, bring the tablet forward a few mm and drop it down to be just above the shaft of the wheelbase.
Choose whichever works best for you - I've included a mousehole (5mm) for a cable to feed through in case that's useful
Simple print, shouldn't need supports on the smaller holders. For the full scale holder, depending on how your printer handles long bridges, you may want to paint a support there (I needed it).