1 / 6
Zoey's Shin Kai - No Supports - Snap Together - Glows: Add Lights Inside
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap together, prints flat with room for a small glow stick inside
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution
Print your own Shin Kai that can glow!
Model snaps together firmly. Recommend using PETG to avoid warping that occurs with PLA and printing by object instead of by layer.
I made this flat instead of tapered and curved to avoid the need for any supports.
Print instructions:
Print face down on a textured plate (preferred)
0.16mm first layer
0.16mm layer height
3 wall loops
Top shell layer: 1
Bottom shell layer: 1
Print sequence: by Object (Others menu in OrcaSlicer)
Glow sticks:
Mini glow sticks with 4mm diameter or less will fit inside