1 / 13
Turbine Lamp
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
All parts were printed on a P1S 3d printer.
In addition to the top and base, you will need to print 10 foil pieces.
Print Settings:
Infill: 0% for each foil. 5% for the base and top
Infill Pattern: Gyroid.
Layer Height: .2mm for the base and top. .1mm for each foil.
Supports: Supports are only needed for the base.
I recommend decreasing your top surface line width to about .38 when printing each foil part to get a cleaner surface.
You will also need to purchase a Remote Control RGB LED Lamp Kit 001. You can find these on Amazon.com https://www.amazon.com/dp/B0F18V1LWH?ref=ppx_yo2ov_dt_b_fed_asin_title