1x18650 Power Bank Holder Stand for Handheld Flashlight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable stand for 1x18650 power bank, converting it into a portable flashlight or lamp
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 3D printable holder/stand designed to convert a 1x18650 power bank into a convenient handheld flashlight or lamp.
The model is optimized for printing with PETG or PLA filament.
Print it in the orientation shown in the photo, with a layer height of 0.2 mm.
For PETG, you might need to slightly increase the scale to ensure a snug fit.
The case includes holes for M3 screws to securely fasten the power bank in place.
If you plan to use this holder as a lamp stand, you will need an M6 screw to attach the lamp fixture.