RepRapMicron V0.05 Probe Z Axis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parts to add a probe "print head" and Z Axis motion control to the RepRapMicron micron accurate 3D printer.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
These parts attach to a RepRapMicron Axis Driver to turn it into a Z Axis with a print head. The print head allows deposition of UV resin in 10μm or finer droplets, or subtractive fabrication and manipulation with a stouter probe tip, with a theoretical <1μm layer height.
Also included here is the MAUS Z Tower for mounting the Z Axis Driver on. This part is not needed for the PIKA variant (under development).
Prints in PLA with no support.
Assembly details and links to the required Axis Driver are found here.
Printable files for making a v0.05 Axis Driver have been put on Printables.