Samsung Galaxy Watch 5 & 6 Charging Cradle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to fit the Watch 5 & 6 charging base, but should fit other numbers and models
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
A desk cradle for the USB charging base of a Samsung Galaxy Watch 6 although I have since also fitted bought a Watch 5 Pro with the same size puck.
The shelf for the watch can be rotated +/- 30 degrees before you fit the cable, which then routes along a curved channel and can exit from the front or back of the base.
This may also fit other Galaxy Watch chargers with a 29mm base. (Galaxy Watch 5 Pro is pictured)
The genuine round "puck" measures about 29mm diameter. Some 3rd party USB chargers might not fit this, so check before printing. I do have a different design (not uploaded) for a 34mm diameter 3rd party charger if you're interested.
I printed in PETG with a negative 0.1mm horizontal expansion. If your material locks the shelf in position you might need to give it a firm twist to unlock the first time, or add negative expansion as required. PLA is less prone to this. If you use too much expansion the shelf will just be loose. Once the cable is fitted it should stay in position.