Stackable Game Token Bowls with Stable Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of small bowls and a matching weighted tray for organizing board‑game tokens, cubes or coins during play.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This model includes:
4× individual token bowls with a rounded inner shape that is gentle on components and easy to scoop from.
1× flat, sturdy tray that holds the bowls snugly so they do not slide around the table. The footprint is low and wide to resist tipping.
The bowl STL is relatively large (around 10 MB) because it uses a very fine resolution to keep the rim and inner wall perfectly circular and smooth. This does not affect print time, but may load a little slower in some slicers.
The bowls have a small overhanging edge at the top so you can pull them out of the tray easily. Because of that lip they are best printed with supports (only from build plate), but you can also try printing them upside down if your printer handles bridging well.
Designed primarily for generic board‑game tokens, but also works for coins, cubes, resource bits, and small miniatures. The tray is intentionally a bit heavier (around 100 g in PLA) so it sits solidly on the table and does not move when you reach for pieces.
Recommended print settings:
Material: PLA / PETG
Layer height: 0.12-0.16 bowls / 0.2 tray
Infill: 10–15% for tray and bowls
Perimeters: 2 - 3 walls
Supports: only for bowl lip (from build plate)
You are welcome to use this set freely in your games and photos. If you like it, check out my other board‑game inserts and organizers in my profile.
☕ Support: https://buycoffee.to/jamar
🛒 More designs: https://cults3d.com/en/users/jamar3D/3d-models