1 / 2
Rak WisMesh 1 Watt Booster 3401 + 13302 Simple Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used Jm3000's mounting plate and built a case around it. This is a simple case for the Rak WisMesh 1 watt kit.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 320
- Wydruki
- 1
- Wyświetlenia
- 2021
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 11)Remiksy (1)Kolekcje (33)Powiązane
I recently was delivered my 1 watt boosters but couldn't find a good simple case for them, I run my antenna wire outside and keep my radio inside so I just needed something to securely mount the board, keep the antenna from spinning and allow easy USB-C connections.
M3x4 screws were used to secure the board to the mount and secure the lid to the box, you should only need 8 of them.

