1 / 12
Articulated Rosolotl(Axolotl) - 6mm + 8mm glass eye compatible — zdjęcie 1
1 / 12

Articulated Rosolotl(Axolotl) - 6mm + 8mm glass eye compatible

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Rosolotl! The Axolotl originally designed by AKinferno, now compatible with glass eyes and dazzled with roses. :)

Ocena
5 / 5
Polubienia
590
Pobrania
2071
Wydruki
3
Wyświetlenia
7835
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Let's see what I've remixed so far: an Axolotl - check ✅, a hybrid of 2 Axolotls - check ✅, a Lovolotl - check ✅, and now I present you with the one and only Rosolotl ready for valentine's day! :) 

I am providing two versions - a 6mm and an 8mm glass eye version. The 8mm glass eye version is slightly bigger. I printed the 6mm version and some of the smaller roses are a bit tricky printing them that small. For this reason I will recommend printing the 8mm version. 

No supports or brims required to print. Good bed adhesion is important, though. 

I used 8% infill and printed it at 0.12mm layer height. I recommend this layer height to get the best details from the small roses. 

Note: Use Arachne wall generator in your slicer settings for the small roses to print correctly.

Happy printing :)

Feeling generous enough to buy me a coffee? Or join my membership to get 3 converted STLs per month. :) - https://buymeacoffee.com/B3ND

Affiliate links for glass eyes.

Aliexpress
https://s.click.aliexpress.com/e/_c3fHmdwH


Amazon

https://amzn.to/4sKbrO0

https://amzn.to/3YATeVl

Filament used: Strawberry red 

https://amzn.to/4awUKhQ

My printer: Elegoo Centauri Carbon
Affiliate link - https://amzn.to/4qfU9Xj

Tagi