Dowelling Jig for Face-To-Edge Joints
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This jig allows drilling very precisely placed dowel holes for joining the edge of one part to the face of another.
- Ocena
- 5 / 5
- Polubienia
- 143
- Pobrania
- 453
- Wydruki
- 0
- Wyświetlenia
- 4354
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v2.0
This jig allows drilling very precisely placed dowel holes for joining the edge of one part to the face of another. Dust collection is supported.
My blog explains more about this jig: http://www.theiling.de/cnc/date/2019-12-29.html.
Print instructions
This was printed in PET at 0.2mm layer height and 25% infill (there isn't much infill, though). PLA will probably work, too. ABS might shrink a bit, but may work, too, but I did not try.
There are two STL files: the one with '_2' in its name is rendered by OpenSCAD. The one without '_2' is rendered by Hob3l (https://github.com/moehriegitt/hob3l), presliced to 0.2mm layer height.