Pug Hueforge Bookmark (0.2 & 0.4 Nozzle)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pug Hueforge Bookmark (0.2 & 0.4 Nozzle)
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Overview
A black & white Hueforge-style pug bookmark with a clean border and a hanging hole for a tassel or cord. Designed as a simple, reliable flat print with no supports.
You’ll get two versions:
0.2mm nozzle (recommended) – noticeably better blending and detail
0.4mm nozzle – quicker and easier if you don’t have a 0.2 nozzle
Printing Details
Material: PLA
Size: 150mm × 50mm
Orientation: Print flat on the bed
Supports: None
0.2mm Nozzle (recommended)
Layer height: 0.04mm
Initial layer: 0.10mm
Start colour: Black
Switch to White at Layer 25
0.4mm Nozzle
Layer height: 0.08mm
Initial layer: 0.16mm
Start colour: Black
Switch to White at Layer 10
Filaments used (tested):
Bambu PLA Black
Bambu PLA Jade White
No AMS? No problem
If you don’t have an AMS, open the 3MF and replace the colour change with a Pause at the listed layer, then swap filament manually and continue the print.
File Formats Included
3MF
STL
Variations
0.2mm nozzle version (best results / best blending)
0.4mm nozzle version (faster, more accessible)
Assembly
Optional: add your own tassel/string through the hole (not included).
Licence Notes
Recommended: CC BY-NC 4.0 (credit required, non-commercial).