Harry Potter Portrait Bookmark
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Harry Potter Portrait Bookmark
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 25
- Wydruki
- 1
- Wyświetlenia
- 122
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Overview
A Harry Potter portrait bookmark designed for crisp multi-colour detail in a slim, rigid print. It’s AMS-compatible (automatic colour changes), but you don’t need an AMS — you can print it on a single-extruder printer using manual colour swaps.
Printing Details
Size: 150mm × 50mm × 1.52mm
Material: PLA
Supports: None (support-free)
Print orientation: Flat on the bed
Adhesion: No brim needed — make sure the build plate is clean (large contact area)
Nozzle: 0.4mm
Layer height: 0.08mm
Base layer: 0.16mm
Infill: 100%
Colour Changes (AMS or Manual)
The 3MF has colour changes set up. With an AMS, it’ll run automatically. Without an AMS, swap manually at:
Start Black
Layer 6 (0.56mm): change to Red
Layer 9 (0.80mm): change to Sunflower Yellow
Layer 12 (1.04mm): change to White for the rest
File Formats Included
3MF only (colour changes configured)
Variations
None (single version)
Assembly
None
Licence Notes
Personal use only. No reselling or sharing the files, and no selling printed copies.