FiiO Jade Audio JM21 DAP Clip Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for the JM21 in its clear factory sleeve
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 437
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
I liked my case for the M21 so much I made another for the Jade Audio JM21 baby brother.
It sits in the case upside down for easy headphone port access. As such you might want to get some fillers for the USB C port and whichever audio port you don't use. To keep stuff out of them. Retain the factory clear half case for padding.
If it fits loose in the case just stick a business card or 2 behind the JM21.
Again good PLA or PETG, 3 walls 15% infill. I only printed PLA so the clip (which is very tight) may need adjusting if you use PETG
06/13/2026 Added a version where the JM21 sits in the case right side up. And I rounded the corners off a bit in this version as they where a bit sharp before.