1 / 2
Dibbler for trays of plants
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For creating an opening in soil.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
For best results, print with the "handle" on the bottom.
Intended material is TPU with 95A shore hardness. This creates a decent hand feel while keeping the tool fairly rigid. TPU is also very durable. Specifically, I used orange TPU 95A from Overture.
The 3mf has the model set to 15% gyroid infill for the handle, then a modifier is applied to reduce the rest of the infill to 10%. Use 3 wall loops. A lower infill percentage may be fine but has not specifically been tested.
