Bottom Plate for Skateboard Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I decided to protect my daughters wall from the lower wheels. The part adds to the Skateboard Wall mount from Gumbert.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 31
- Wydruki
- 3
- Wyświetlenia
- 336
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
I downloaded and 3d Printed Gumberts Skateboard Wall Mount for my daughter. I was instantly concerned that the bottom wheels would start marking up the wall, so I made a back plate. This plate is dimensioned and designed to be a supplement to Gumberts set. I printed both his stuff and the additional plate using the same settings as well.
Print Time: 2h37m
Filament Type: PETG
Used Filament (g) 34.86
Used Filament (m) 11.41
Cost $0.97
Infill: 15%
0.20mm QUALITY
Nozzle Diameter 0.4mm
Nozzle temp 1st layer: 245°C other layers: 250°C
Bed temp all layers: 90°C