Harbor Freight Pittsburgh Heavy Duty Hand Riveter Jar Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Unfortunately when shopping and purchasing tools from Harbor Freight sometimes they are damaged. In my case after…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Unfortunately when shopping and purchasing tools from Harbor Freight sometimes they are damaged. In my case after getting home I discovered that my bran new Pittsburgh Heavy Duty Hand Riveter came with a shattered rivet ends jar cap. I'm not sure if it had anything to do with the employees working in the back and always slamming the boxes of merchandise down to see who can make it sound like they are working the hardest but its a shame these tools travel all the way from China over seas just to make there final destination and employees damage them. Anyways here is a replacement part that will save you a drive back to the store. Thanks
Print PTFE or PLA
Turn supports on using lines at about 8%-12% and print up rite
Infill 20%
Be sure your hole expansion is calibrated fairly well and don't worry about the z seam on the outside. When done printing replace the damaged part rivet with pride and quality! :)
Category: Tools