Electric Power Steering Pump Power Connector for Mini Cooper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Electrical connector for a electric power steering pump from a 02-08 Mini Cooper. You will need 18g wire and two male…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Electrical connector for a electric power steering pump from a 02-08 Mini Cooper. You will need 18g wire and two male spade connectors. First print the connector then remove the sleeves from the spade connectors and crimp them on to your wires, optionally you can add a drop of solder to each crimp. Next add a 10 degree bend to the spades and feed the wires in through the front of the connector and pull them through. Lastly add a shrink tubing and your all good to go. Plug the connector into your power steering pump and power the unit up!
If you need a control port plug look at the second connector to this pump here ==> https://www.thingiverse.com/thing:4671991
Print Settings
Printer Brand:
Creality
Printer:
Ender 4
Rafts:
No
Supports:
No
Resolution:
0.04
Infill:
25%
Notes:
I used Polyflex TPU, with tree supports with the camera mount printed on its side.
Print Speed of 20mm/s.
Category: Automotive