Pringles Cryptex: Easy-Access Snack Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An attachment to the Pringles locking cryptex safe. This tray snaps into the lid part to make accessing those chips easy
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 353
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Never struggle to reach the bottom of the stack again. This attachment is a functional tray designed specifically for the Pringles Protector system, making it easier for users with larger hands to retrieve chips without tipping the entire tube. I could also be used on its own as it will fit completely inside a pringles tube.
Features
Seamless Integration: The tray is engineered to snap directly into the underside of the existing cryptex lid.
Slide-Out Convenience: When you unlock the cryptex, the tray pulls the chips out with the lid.
Low Profile: Designed to occupy minimal volume so it doesn't crush your chips while the lid is locked.
Print Settings
Nozzle: 0.4mm
Layer Height: 0.2mm
Supports: None required (designed for clean, vertical printing).
Assembly: Simply align the tray with the round underside of your cryptex lid and push into place. A small drop of superglue can be used for a permanent bond, though the snap-fit is designed to be secure on its own. (you may need to scale it slightly depending on your printer's tolerances.)