VW Golf 6 (And alike) wireless charger with 12v socket and card holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anotha remix to make it more suitable for my needs
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 557
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Yet simple(ish) remix to meet my needs.
Tested on MK3 VW Scirocco
Phones that DID fit:
S24 w Pitaka case
iPhone 13 Pro with generic silicone case
iPhone 14 Pro with generic silicone case
iPhone 15 bare
Based to use jfh-pwc-tx006 wireless charger module and CKCS U1E pd board or similar (optional)
The remix is quite rough cause I'm not that good with CAD as most people here and remixing complex STLs is not that fun as you might think. In theory, the 20A rail for a 12v socket should handle if you don't try to push a lot from the socket while both wireless charger and PD board are in use.
Disclaimer: The documents online on the jfh-pwc-tx006 are wrong about the hole placement so they won't line up exactly, Tho there's a little wiggle room to place the board exactly to screw all 4 in. I was just lazy to redraw, to be honest.
WARNING. THE MODEL IS MADE FOR USE WITH SMALL PHONE (I've got a Samsung S24 and it fits quire snug there. Bigger phones won't fit)
BOM:
x9 M2 threaded inserts
jfh-pwc-tx006 wireless charger module
VW 12v Socket (1J0919307 and alike)
12V Socket connector 1J0919321 (You can easily find both male and female on Aliexpress)
12V 40x40mm fan
A bunch of different M2 bolts (Just buy a pack, it's simpler)
And a bunch of wire (I used 18 AWG just to be on a safe side)
CKCS U1E (Optional)
Some clear 1.75mm filament (Optional, but a must if you add the PD board. Used in PD board hull for the indicator light)
Some carpet with glue base (Optional, but makes it way more appealing)
2x 14x14x6mm radiator (Optional, but if you intend to put the PD board it it's obligatory)
150W Boost converter (Optional, but if you intend to put the PD board it it's obligatory)