PTFE tube feeder/jam prevention
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Help feed filament into the tube especially if theres a kink in the filament
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was having trouble with the ptfe tube jamming when reaching the end of the spool, the little kink in the filament where its tucked into the spool to hold it on the spool was meeting the tube at a steep enough angle that it stopped the feed, so i took this connection device and modified it to act as a sloped feed that allows the printer to straighten the filiment before it meets the ptfe tube. So far since printing these i have had no stops due to kinks in the filament also makesloading easier as you dont have to aim at the tubeyou can just push it into this and it will feed
If you dont have space for the screw on connection i have encluded a pressfit version aswell