SD2IDE bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mounting bracket for SD to IDE adapter
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a mounting bracket for SD to IDE adapter that allows you to mount the device in the card slots
Mounts with 4 x M3 screws, there's a place for M3 nuts in the back but it can also be self tapped to the plastic
There are other similar adapters but I found them a bit flimsy so I made this version, there's a tab that should align on top of the agp/pci/isa slot to give extra support as well
I used tree supports when printing, slots for the m3 nuts are slightly beveled so they can be printed without supports
Here's a example of the adapter https://www.aliexpress.com/item/1005009819108931.html