Aprilia AP8213079 brake gasket rebuild set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a brake gasket set for an Aprilia Tuareg 50 motorbike. I designed this gasket set because a brake cylinder…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 401
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is a brake gasket set for an Aprilia Tuareg 50 motorbike.
I designed this gasket set because a brake cylinder rebuild kit is not available.
This kit is for a hand brake rebuild.
The parts have to be printed with NinjaFlex or a similar rubber material that can withstand break fluid.
After printing the parts must be stretched to fit onto the piston, if they deform use hot air to make the parts regain their original shape.
This gasket set can also be used for brakes on Aprilia, Af1, Classic, Futura, Rs, Rx, Tuareg, Rally, Red, Rose, Wind, Project, 108, 50, 1988, 1989, 1990, 1991, 1992, 1993, 1995, 1999.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
10%
Filament: NinjaTek NinjaFlex Black
Notes:
If part is to hard to stretch over the piston, parts can be printed with less perimiters/ less infill to be more flexible.
Category: Automotive