LED Tealight Holder for Paper Lanterns — IKEA SKATGÅS + Temu Planet Lanterns
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount IKEA SKATGÅS LED tealights inside round paper lanterns — snaps onto 1.3mm wire frame, no glue needed.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple two-piece holder that lets you safely mount an IKEA SKATGÅS LED tealight inside round paper lanterns. Designed for the planet-themed lanterns from Temu, but works with most standard paper ball lanterns that use a 1.3 mm diameter wire frame.
The problem: These beautiful paper lanterns come with a wire frame and a socket for a bulb, but no clean way to use a battery-powered LED tealight inside them. The candle just sits loose at the bottom or you're stuck rigging something with tape.
The solution: Two 3D printed parts — a base that snugly holds the SKATGÅS tealight, and a frame with two arms that rest on the lantern's wire crossbar (1.3 mm wire diameter), centering the light inside the globe. Just drop the tealight into the base, snap the base into the frame, and hang it. No glue, no tape, no modifications needed.
What you need:
IKEA SKATGÅS LED tealight (battery-operated)
Round paper lantern with a 1.3 mm wire frame (Temu planet lanterns or similar)
No supports needed, prints flat on the bed
Print settings I used:
PLA
0.2 mm layer height
No supports
Enjoy your glowing planets! 🪐