Beagle Valentine HueForge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple Valentine with two beagles, made with HueForge.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 170x170mm in size
You may print at higher layer heights below the Base Thickness of 0.4mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.16mm
#0a0a0a PLA SUNLU Meta Black Transmission Distance: 0.1
#986550 PLA Made for Prusa PLA+ Skin 479C Transmission Distance: 0.2
#f1be3d PLA SUNLU Meta Lemon Yellow Transmission Distance: 6.3
#e40031 PLA SUNLU Classic Cherry Red Transmission Distance: 2
#ffffff PLA Spectrum Premium Arctic White Transmission Distance: 4
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Skin 479C
At layer #11 (0.96mm) swap to Lemon Yellow
At layer #18 (1.52mm) swap to Cherry Red
At layer #20 (1.68mm) swap to Arctic White for the rest.