Kratky Pot with Three Hole Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is part of a series of Kratky hydroponic pots and lids. The wall size is specifically designed for a .8mm nozzle…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 532
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This is part of a series of Kratky hydroponic pots and lids.
The wall size is specifically designed for a .8mm nozzle with .8mm wide extrusion for fast printing. It was printed hot in PETG.
This one holds three inch Aerogarden pods or similar.
The basic outer shell is intended to use a 2 liter drink bottle, in this case tonic water from Publix. By using a drink bottle, the design is food safe which is not normally true for 3D printed designs due to bacteria lodging in the crevices.
It should be printed in black to block algae growth.
Category: Outdoor & Garden