Kratky Pot with Three Inch Netpot Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is part of a series of Kratky hydroponic pots and lids. The wall size is specifically designed for a .8mm nozzle…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This is part of a series of Kratky hydroponic pots and lids.
The wall size is specifically designed for a .8mm nozzle with .8mm wide extrusion for fast printing. It was printed hot in PETG.
This one holds one three inch net pot.
The basic outer shell is intended to use a 2 liter drink bottle, in this case tonic water from Publix. By using a drink bottle, the design is food safe which is not normally true for 3D printed designs due to bacteria lodging in the crevices.
There is a slot down the side to view the nutrient level.
It should be printed in black to avoid algae growth.
Print Settings
Printer:
Railcore ZLT
Rafts:
No
Supports:
No
Resolution:
.8mm Nozzle .8mm wide
Filament: Sunlu PETG Black
Category: Outdoor & Garden