Aerogarden Sprout Seed Starter Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is part of a series of Kratky hydroponic pots and lids along with Aerogarden prints. This is for an Aerogarden…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 602
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This is part of a series of Kratky hydroponic pots and lids along with Aerogarden prints.
This is for an Aerogarden Sprout Seed Starter. The starter allows light to shine on the sponges promoting algae growth. This design covers the holes and has small tabs that hold it together until the plants get big enough to remove, then the tabs are snapped or clipped and the part is broken apart.
The wall size is specifically designed for a .8mm nozzle with .8mm wide extrusion for fast printing. It was printed hot in PETG. It should be printed in black to block light.
The dxf can be edited for the labels of what you planted.
Category: Outdoor & Garden