1 / 3
Kratky Pot and 1 Hole Lid for Aerogarden Pods — zdjęcie 1
1 / 3

Kratky Pot and 1 Hole Lid for Aerogarden Pods

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is part of a series of Kratky hydroponic pots and lids. The wall size is specifically designed for a .8mm nozzle…

Ocena
0 / 5
Polubienia
13
Pobrania
22
Wydruki
0
Wyświetlenia
413
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is part of a series of Kratky hydroponic pots and lids.

The wall size is specifically designed for a .8mm nozzle with .8mm wide extrusion for fast printing. It was printed hot in PETG.

The basic outer shell is intended to use a 2 liter drink bottle, in this case tonic water from Publix. By using a drink bottle, the design is food safe which is not normally true for 3D printed designs due to bacteria lodging in the crevices.

This one holds one Aerogarden or similar pods.

It should be printed in black to block algae growth.

Print Settings

Printer:

Railcore ZLT

Rafts:

No

Supports:

No

Resolution:

.8mm Nozzle .8mm wide

Infill:

any

Filament:

Sunlu PETG

Black

Category: Outdoor & Garden

Tagi