1 / 7
RailCore AL Belt Retainer with Support Blocker
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the Aluminum Belt Retainer as designed by Tony Akins. Because I had problems with printing this in…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a remix of the Aluminum Belt Retainer as designed by Tony Akins.
Because I had problems with printing this in PETG initially, I designed a support blocker that prevents the internal supports from touching the rectangular side walls.
Support blockers are included for the screw holes also.
It printed best for me with the large base down.
The best filament I found was SnoLabs CF PC+
Category: 3D Printer Parts