RailCore SlipFit Electronics Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When I decided to reprint the RailCore Electronic Box corners in a different color, I figured in true RailCore spirit,…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
When I decided to reprint the RailCore Electronic Box corners in a different color, I figured in true RailCore spirit, I'd just redesign everything.
The corners do not require screws to hold in the sides as they just slide in and include a loft to support the top so no supports are needed.
There is a middle connector to fit the existing holes in the kit ZLT. It is not required for the ZL.
To allow access to the USB and SD card, there is a slot in the top front side.
The top rear side is modified to fit the power input that comes with the kit.
The bottom front, only for the ZLT, has a Decora on/off switch to make it easier to reach than the one in the back.
The bottom rear, only for the ZLT, has a convenience outlet to plug extra things into.
Print Settings
Printer:
RailCore or BigBox
Rafts:
No
Supports:
No
Resolution:
.4mm nozzle
Infill:
15%
Filament:
Any PLA
Silk Grey
Category: 3D Printer Parts