Railcore ZLT Flipped Yoke Alignment Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a taller Z alignment tool for the Railcore ZLT when the yokes are turned over although it will work with the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a taller Z alignment tool for the Railcore ZLT when the yokes are turned over although it will work with the standard ZLT. Because the ZL does not have bearing holders, it is not required.
The model is intended to print large side down but both the top and bottom have slight fillets to avoid elephant foot. It printed fine on clean glass using PLA and no raft or supports.
Fusion 360 is included which can be modified to get the exact snug fit.
This model is actually taller than the picture.
Print Settings
Printer:
BigBox
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
Any
Filament:
Any PLA
Category: 3D Printer Accessories