Candle mold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- GNU General Public License v3.0
Be careful when making candles, hot wax can burn you.
How to make Candle?
Assemble all parts of the mold.
Measure the wax and heat the wax in a water bath until it is completely liquid. Optionally add colors.
Fill the molds with wax up to the edge.
Place the molds in the refrigerator or in a cool place.
Allow the candle to cool for several hours.
There will be a small crater at the top. Cover with hot wax and leave to cool again.
Carefully split the mold.
In case of uneven pouring, level the bottom of the candle with a knife.
Printed parts:
Mold 3x
Lock 3x
Other parts:
M4 bolt (20mm or more) 3x
M4 nut 3x
How to assemble?
Print all the V.2 parts
Smooth all contact surfaces with sandpaper so that they fit together perfectly.
Assemble all the parts as shown in the picture and tighten the clamps with the screws.
