Canyon CP0030 Wahoo Mount with Integrated GoPro Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The semi-integrated cockpit of my new Endurace bike (CP0030) made it difficult to use some existing mounts, as the…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 378
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The semi-integrated cockpit of my new Endurace bike (CP0030) made it difficult to use some existing mounts, as the brake and shift cables were in the way. So, I jumped into Fusion 360 and designed my own solution. I’m using a Wahoo Elemnt Bolt V2, and my first priority was ensuring a snug fit.
Luckily, my employer let me use their HP MJF printer, but I didn’t want to stress it too much, so I designed an inner piece first that fits the Wahoo just right. The insert is secured with two small M4 countersunk screws. The whole assembly is then screwed with two M4 countersunk screws onto the cockpit.
The underside features a traditional GoPro mount with an M5 nut, allowing me to attach a bike light and adjust its angle as needed.
Category: Sport & Outdoors