Airbrush Booth Magnetic Hose Coupler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I got fed up of the fragile stock coupler that came with my hobby spray booth, so I had a go at making my own. It does…
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 569
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I got fed up of the fragile stock coupler that came with my hobby spray booth, so I had a go at making my own. It does make things slightly fatter when all packed down, but worth it for the convenience factor.
Make sure to print the booth coupler with supports - I added cutouts so that the original fan guard could be retained.
Attaching the booth coupler can be a bit fiddly, but is doable if you make sure to thread a couple of cable ties through to secure the fan frame to the guard while you have the screws removed.
You will need:
8x strong magnets (dimensions 10mm diameter x 3mm)
5 minute epoxy to attach them
IMPORTANT: Make sure you keep track of which way the magnets go in so you don't accidently have them repelling instead of attracting.
Unrelated side note:
I do strongly recommend adding a cheap PWM controller to these booths to use lights only and give you independent speed control of the fan.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
25%
Category: Tools