USB C decoy case with XT60 output
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for a 140W USB C decoy with XT60 output.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this case to supply my RC charger.
This USB C decoy can be configured to supply 5, 9, 12, 15, 20 and 28V. I created models showing these voltages as text. There are also models without text. So you can combine them as you like.
The PCB has two holes with a diameter of 2 mm. I used srews with 1.7 x 5 (the PCB holds also without screws within the case, but I guess it is better to use screws so that the plugs do not get so much force). The two parts of the case snap together, so you do not need srews for them.
I printed it in PLA with 0.2 mm layer height.