Razor MX650 / MX500 Stock Controller Frame Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Frame-mounted bracket for the stock Razor MX650 / MX500 controller. Secure, clean, and easy to install. Needs Hardware.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a frame-mounted controller bracket designed for Razor MX650 / MX500 bikes running a 48V battery while retaining the stock controller.
When upgrading to 48V, the stock controller is often relocated or left poorly supported. This mount secures the controller directly to the frame for a cleaner, more protected install without cutting or modifying the frame.
Designed and test-fit on a stock MX650 frame.
Features
Designed for 48V MX650 / MX500 setups using the stock controller
Frame-mounted for improved security and protection
Clean, low-profile fit
No frame cutting or permanent modifications required
Simple print and install
Print Settings (Recommended)
Material: PETG or ABS (PLA not recommended for heat and vibration)
Layer height: 0.2–0.28 mm
Infill: 30–40%
Walls: 3–4 perimeters
Supports: Not required
Installation
Requires hardware to mount.
Verify controller clearance and secure all fasteners before riding.
Notes
Model includes subtle Ampirra branding engraved into the part
Free for personal use