Kalavakus Demon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here's a model that I made for the Pathfinder Kalavakus Demon!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've been really enjoying playing Pathfinder recently. My players are going to come up against a Kalavakus demon in a future session, so I decided to go ahead and model one up for printing! Given the horns, digitigrade feet, and tail, this guy is a pretty good stand-in for just about any fiend that you might want at the table, so I printed out a bunch of them, just in case =)
There's no great surprises when it comes to printing this guy. The downward pointing forearm spikes are a pain and there's no getting around that, but I curled the fingers upwards and added a mouth filler and chin ramp and those other little techniques to make it slightly more printer-friendly.
As always, the .blend file and pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although the support points should work for SLA printers) for this model are available to my patrons at https://patreon.com/VirtuallyJason. If you appreciate my work and have a few dollars to spare each month, please consider joining!