Improved Gasket Adapter for CORE One Advanced Filtration
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The OEM foam gasket adapter that came with the kit is pathetic. This one is better for multiple reasons.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 242
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is an improvement on the foam insert that comes with the CORE One Advanced Filtration System. I'm calling this foam piece the "gasket adapter" because it seems to try to adapt the non-uniform surface of the blower to the flat and square sealing surface of the HEPA filter.
So, why is this part better?
It's taller and rigid and allows the HEPA filter gasket to actually be compressed when installed. The blower will be sealed against the filter with this part, unlike the OEM adapter.
The adapter interface is square not circular. It will allow for air to flow through all of the activated carbon channels.
Print it out of any rigid plastic. Not TPU/flex.