Muzi.work R1 Charging Dock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Charging station/dock for the Muzi.work R1 Meshtastic nodes
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
These are the magnetic charging cables that I used for this.
In testing, printing at .3mm layer height produced a good friction fit. When I printed at my normal .2mm layer height, the cables didn't stay put, but that was fixed with a bit of hot glue to keep them in place.
I wanted a charging dock for some muzi.works R1 Meshtastic nodes I have lying around, but I didn't see anything that was readily available that fit my need. Tonight I whipped up the dock minus charging input just to tidy up my desk a little bit.
I've included the STLs for 1, 2, 3, 4, and 5 nodes, but I designed this in Onshape so if you want to make changes, feel free. I also included the tool body I used to cut the slots in case anyone finds it useful for other projects.