Ender 3 V1 Direct Drive Kusba mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for the bed, a mount for the nema 17 direct drive stepper for the toolhead.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The kusba is mounted with 2 M3x6mm bolts.
The holes to mount the kusba are designed to be threaded with the bolt as its being screwed in.
I found best results with the simple bed mount were it lying upside down, and putting support blockers on the holes and tree supports elsewhere, I have attached a screenshot of the resulting slicing in orca slicer. I cannot get them to print well side ways so having supports works better for me.
Print the stepper motor mount with the screw holes facing down, no supports are required, any other orientation and the holes are too big for M3 screws.