DIY VR-Treadmill, Trash Omni Device, addon for the Maratron
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is A adon for a manual Treadmill to convert forward movement into sideways moving in VR games.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 377
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are all three parts you need to build the Frontpart of the T.O.D,
It is an Addon to the DIY Maratron, a DIY VR-Treadmill and it allows you to move sideways via physical movement.
I Printed the Box for the Maus and the upper part solid, the round thing with 6Walls and 30% infill.
But Im pretty shure the upper part would hold up just finde with way lesser infill.
I used basic PLA.
You also need these Parts:
1x M860+
1x Ballbearing 608
2x M8 Nuts ! or 4x M8 Nuts if the Screw is longer than 60mm !
9x M5 Nuts (or 5xM5 Nuts and 4xM5 Wingnuts)
4x M525
1x M540
1x M5 Washer
6x M320 Wood Screws
1x Wooden middle plank (5*3 in the cross section)
What I used to connect the wooden plank to the handrail:
2x Angles
4x M540 Screws +Washer and nuts
2x M880 Screws (everything from *50+ should work) +Washer and nuts
If you want to see how to assemply it, here is the link to my video of it:
https://youtu.be/HVKPNnUlI8E
And if you want to see it in action, just watch the other stuff on my youtube chanel.