The no-strings part cooling fan duct for Sovol SV01 Rev.3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Introducing the no-frills, no-strings duct your SV01 will become an instant fan of :D. Designed with PETG in mind. A…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 184
- Wydruki
- 0
- Wyświetlenia
- 1336
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Introducing the no-frills, no-strings duct your SV01 will become an instant fan of :D. Designed with PETG in mind. A sagging-resistant design, it will not bump into your prints. Minimal path air flow that will not cool the nozzle.
- Rev.2.1 is simplified internally to print faster and more reliably and has a built-in support for the vent arch. Just Xacto it away from the part when done printing. (10-29-21)
- Rev.3 Standalone has an optimized airflow path and is perfect if you no longer use the stock metal heat break shroud as it will mount directly to the X-carriage using one short M3 screw. (5-13-22)
- Rev.3a Standalone for BMG/Left style extruders added. (10-22-22)
All further development for BMG/Left extruders goes here.
It's so simple to print even I could do it, please post makes! :)
Print Settings
Printer:
Sovol SV01
Rafts:
No
Supports:
Included
Resolution:
0.2
Infill:
15%
Filament:
SainSmart PETG
black
Notes:
Needs PETG or ABS due to proximity to the hot end. Tinkercad deisgn is available in CC attrib non-commercial share-alike license.
Category: 3D Printer Parts