Kingdom Come Box for Philips OneBlade 360
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box for Philips OneBlade 360 with sliding lid and KCD 2 logo. Two versions: smooth and wood texture.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 468
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
📦Storage box (video)
A storage box designed for the Philips OneBlade 360 QP4631/65, featuring a Kingdom Come: Deliverance 2–inspired motif.
The model comes in two variants:
Smooth version
Version with 3D wood texture
🖨 Printing Recommendations
Print the logo and text facing the build plate to achieve a clean, smooth surface with well‑defined details.
Using a textured build plate can further enhance the final appearance and give the lid a more premium look.
🔒 Lid Lock
The lock holds very firmly — the lid will not open on its own, even when carried around.
💡You can fine‑tune the locking strength to your preference:
For a softer snap, simply sand the tabs slightly.
The more you sand them, the easier the lid will slide in and out.
🎨 Filaments Used
Prusament PLA Noctua Brown
Prusament PLA Noctua Beige
Prusament PLA Blend Viva La Bronze
⚠ Notes
I do not own a Philips OneBlade 360 QP4631/65, so I was unable to test the exact fit of the insert. A STEP file is included for anyone who wishes to adjust or fine‑tune the dimensions.
In the photos, I used my old OneBlade, which doesn't quite fit inside. But a little force helped 😉
📐 Model Dimensions
🔗 Used
For rendering and size comparison, I used https://www.printables.com/model/1588198-philips-oneblade-360-3d-model
The model is based on my crayon box.