1 / 4
Z-axis mount hinge (крепление оси Z) Ender 3 MAX Neo — zdjęcie 1
1 / 4

Z-axis mount hinge (крепление оси Z) Ender 3 MAX Neo

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Draw by myself, the bearing seating strong. (Подшипник садится плотно без люфта).

Ocena
0 / 5
Polubienia
0
Pobrania
28
Wydruki
0
Wyświetlenia
110
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

For some reason, there's no model of this mount available online. When it was damaged, I had to draw it myself. The mount prints beautifully from PETG. The bearing fits snugly without any play.(По каким-то причинам в сети нет доступной модели данного крепления. Когда оно было повреждено, мне пришлось самостоятельно его нарисовать. Крепление прекрасно печатается из PETG. Подшипник садится плотно без люфта.)

Layer: 0.2-0.3

Infill: 35-60%

PETG, ABS.

Support may be needed for holes.

Tagi