Table Top Sliding Fastener - (table buttons that don't need slots)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are two piece table buttons that screw to the top and apron, allowing lateral wood movement with rigid attachment.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
These are two piece table buttons that screw to the top and apron, allowing lateral wood movement with rigid attachment.
Table top buttons usually have a tab that interfaces with a slot mortise in the apron. These are a lazier equivalent, where you get to screw an angle bracket to both, but the bracket being in two pieces allows lateral wood movement while still providing a solid attachment of the top.
Alternative to figure 8 fasteners, z clips or buttons.
Prints without supports, the Apron part prints lying on it's back, the Top part prints on it's side.
I printed mine from PETG. they slide together - a fairly tight connection off my printer. Scale one or the other piece a bit if yours come out too tight or too loose.