Garmin Nuvi mount for rearview mirror
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/gsch3ClbLKq Suction cup sucks and…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 617
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/gsch3ClbLKq
Suction cup sucks and won't stick any more. It's also cracked. This mount clips onto the rearview mirror rod and is secured by a M6 screw & nut. Use two M3x12 screws and nuts to attach the two C clamp bits to each other. ABS is needed to withstand the high temps inside a car.
Source for the C clip is https://www.thingiverse.com/thing:1704784 by Yospong.
It's so simple to print even I could do it, please post makes! :)
Print Settings
Printer:
SOVOL SV01
Rafts:
Yes
Supports:
No
Resolution:
0.2
Infill:
30%
Filament:
any ABS
White
Notes:
!!!PLA will warp in side the car; use ABS instead. ABS is a pain to print. Use a brim around the objects. Learned it the hard way.
V4: use M3 screws, nuts and washers to secure the two bits of the C clamp together. Do not overtighten.
How I Designed This
- Started from C clip https://www.thingiverse.com/thing:1704784 by Yospong.
- Printed V4 in ABS and learned the hard way that ABS is not my friend. Will test inside the car and report back. Although the weather is too cool by now.
Edit: ABS still holding up several weeks later...
Category: Automotive