1 / 2
Exhaust Duct for the CORE One Advanced Filtration — zdjęcie 1
1 / 2

Exhaust Duct for the CORE One Advanced Filtration

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Reduce the restriction and delete the honey comb guard

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
245
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I didn't like the metal honeycomb pattern covering the exhaust port on the advanced filtration box. A Dremel cut off wheel and 5 minutes later... gone! As a finger guarding replacement, I designed this. It's meant for an opening that is roughly 28x60mm. 

I printed it out of PLA in the photo, but I think PETG or PC would work better considering they're more impact resistant materials.